Serial Number on Bayonet Release for the k98 bayonet

[rcmauser]

Wondering when makers transitioned away from serial numbers on the bayonet button release? Was this practice maker dependent or some standard across all manufacturers? I have a S/185K (Elite-Diamantwerk), serial 8490 with serial marked on the blade, scabbard and on the inside of the oblong portion of the bayonet release button.

Other k98 bayonets seem to have wafenampts on the button.

Thanks.

[don w]

Many makers continued numbering the the locking bolt, in some way, till they ceased production.

Some makers stamped the assembly number of the bayonet, rather than the actual serial number on the locking bolts. This is usually found on earlier specimens , but I have seen it done on 44 dated SG84/98 III's.

[BergerBoy]

What's the best method for removing this button from a bayonet pommel?
I have a 43 JWH matching bayonet and scabbard, and wish to dis-assemble fully for a good cleaning and inspection.
I do see the last 2 digits of the S/N on the button edge surface when fully depressed.
I'm cautious to try to loosen the button, given the age and condition of the bayonet (pretty pitted pommel but clean).
Does the button unscrew with a "forked" flat screw driver?
Is it a simple thread? Or some depress-turn type of unlocking mech?

Also - the scabbard screw is missing - the one that holds the inner spring assembly to the scabbard inside at the rim. Where does one find proper replacements? (and what would be a hardware store equivalent screw?)

Appreciate some expert input.
Thanks,

[don w]

Hello, lets see if I can help you out.

1) Simple thread.
I would use the correct armorers tool, if you can ever find one. Ebay or a collectors forum network would be the best place to get one. Next would be to make one yourself. The other method, and I dont recommend it unless an "emergency", is to use a pair of pliers with a very thick piece of leather as buffer , and carefully unscrew the nut.

2) Scabbard Throat Screw: Buy just the bard that has one. You can get them on ebay. Or watch the for sale sections on this and other forums.

Please be careful when disassembling your bayonet. Once scratched thats it. My son always asks me what i want for my birthday and my reply is a gift he cant give me,,,'a time machine'.


What's the best method for removing this button from a bayonet pommel?
I have a 43 JWH matching bayonet and scabbard, and wish to dis-assemble fully for a good cleaning and inspection.
I do see the last 2 digits of the S/N on the button edge surface when fully depressed.
I'm cautious to try to loosen the button, given the age and condition of the bayonet (pretty pitted pommel but clean).
Does the button unscrew with a "forked" flat screw driver?
Is it a simple thread? Or some depress-turn type of unlocking mech?

Also - the scabbard screw is missing - the one that holds the inner spring assembly to the scabbard inside at the rim. Where does one find proper replacements? (and what would be a hardware store equivalent screw?)

Appreciate some expert input.
Thanks,

[BergerBoy]

Thanks Don,

I'll need to be careful - since this was a pretty pitted-up pommel, and probably won't give up the threads without a fight.
Maybe some liquid wrench type of liquid to loosen things up?

Also - who's the woman in your Avatar?

[don w]

Thanks Don,

I'll need to be careful - since this was a pretty pitted-up pommel, and probably won't give up the threads without a fight.
Maybe some liquid wrench type of liquid to loosen things up?

Also - who's the woman in your Avatar?

Hey, just saw your reply.

Her name is Mary Pickford.