GEM

PM sent. Thanks!

Sound reasoning. Thanks for the comment. If I where to pass it along to someone I would use that kind of description. I double checked...

I did check the pictures and thought I was on the right track. Thanks all for the confirmation. I just wish it was in better shape as...

Have had this bolt in my junk drawer for years and thought it was G98. Another recent post prompted me to look at this one more...

I don't know enough about snipers to comment about that possibility. It started out as a standard G98 bolt. But it looks to me like...

Just checked a reference: Bolt Action Rifles by Frank de Haas. He lists the guard screw spacing on a standard military 98 action as 7.825"

With the Mauser Banner I'm thinking a south American contract rifle -- maybe an M1909? If so, it would likely be in 7mm or 7.65mm. They...

Does this filler serve to keep the sear bar away from the receiver to disable the double step trigger pull? Can't think of any other...

Message deleted

I think lightly oiled is best to provide lubrication and corrosion protection. Grease can dry if not cleaned and possibly impede the...

Really hard to tell the years of manufacture from the table and narrative in the Speed book. Mine was acquired and imported from Sweden...

My matching Mm410B has bolt body, extractor and internals in the white. The bolt handle, safety, and bolt plug are blued. Bolt face is...

Bolt release, follower and screws should be OK. Screws will be OK for diameter and threads but may need to be adjusted for length. Not...

Looked good on parade?

One of my favorite excusions while stationed in Germany in the mid-70s was a trip to WF Wurzburg. They had some really neat stuff that I...