Third Party Press
Results 1 to 9 of 9

Thread: Need Help to determine a thread size on a 71/84

  1. #1
    Senior Member
    Join Date
    Sep 2012
    Location
    Florida
    Posts
    112

    Default Need Help to determine a thread size on a 71/84

    Does anyone have the thread size for the 71/84 screws holding the action to the trigger guard? I am Drilling out a sheared off screw in the bottom of the receiver and need to buy a tap to clean up the threads. (Finding screws is another challenge.) Many thanks in advance.

  2. #2
    Senior Member reich1900's Avatar
    Join Date
    Jun 2010
    Posts
    286

    Default

    I just took out the screw in my 71/84 to try and match it up with my tap and die set but with no luck it seems to be between a 5 and 6 mm. Sorry I wasn't more help. I would try and get the screw first.

  3. #3
    Senior Member
    Join Date
    Sep 2012
    Location
    Florida
    Posts
    112

    Default

    Many Thanks for trying. Much appreciated.

  4. #4
    Senior Member
    Join Date
    Sep 2010
    Posts
    971

    Default

    Did you find information concerning the thread size?
    If not, let me know. I'll have a look through the G71 model book by Dr. Storz tomorrow, when I'm back home.

  5. #5
    Senior Member
    Join Date
    Sep 2012
    Location
    Florida
    Posts
    112

    Default

    Hi There, No luck so far on the thread sized. Certainly would appreciate the help. I have held off going any further until I determine a course of action.

  6. #6
    Senior Member
    Join Date
    Sep 2010
    Posts
    971

    Default

    Sorry, but nothing I could find about the screws in the Storz book on the Werder, M71 and 71/84 rifles.

  7. #7
    Senior Member
    Join Date
    Sep 2012
    Location
    Florida
    Posts
    112

    Default

    Many Thanks for taking the trouble to look for the data. Much Appreciated.

  8. #8
    Member
    Join Date
    Oct 2012
    Location
    B
    Posts
    55

    Default

    Quote Originally Posted by PJ1946 View Post
    Does anyone have the thread size for the 71/84 screws holding the action to the trigger guard? I am Drilling out a sheared off screw in the bottom of the receiver and need to buy a tap to clean up the threads. (Finding screws is another challenge.) Many thanks in advance.
    Screws can be ordered here: http://www.guns-and-more.com/Ersatzt...l-G-71-84.html
    You can ask for other screws, usually the have more in stock.
    Regards

  9. #9
    Senior Member
    Join Date
    Sep 2012
    Location
    Florida
    Posts
    112

    Default

    Many Thanks. Great site. When I hit the button to change to English it goes to a beta type example just listing a couple of items.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •