Third Party Press

Erma emp 35

WaA509

Member
I recently acquired an EMP 35 kit and would like to make a blank fire gun out of it (i have already contacted the agencies needed, I work for an SOT, and I have the legal ability to own it in my locality) does anyone have one that I could get specs off of? The bolt is toast and I cannot find ANY references or drawings online
 
These are the full auto specs, you will need to change them so there is not interchangeability on your blank gun. I had run across a guy named Tom Denali about 10 years ago who had an original. Here are the specs he gave me. I also have a bunch of pics of the original parts as well I will post from him.

The bolt O.D. is 25.90 mm or 1.019"
The tube I.D. is 26 mm or 1.024"
The Rec. tube O.D. is 31.85mm or 1.254" for a wall thickness of .057"
The Receiver length is 21-5/8"
Overall and the bolt body is 8"
Recoil tube is 5-1/4"

Hope it helps. I am going to do something similar but I am going to make mine a semi auto and have a blank only barrel made for it.
Kevin
 

Attachments

  • Erma-EMP 001.jpg
    Erma-EMP 001.jpg
    66.1 KB · Views: 44
  • Erma-EMP 002.jpg
    Erma-EMP 002.jpg
    60.8 KB · Views: 48
  • Erma-EMP 003.jpg
    Erma-EMP 003.jpg
    68 KB · Views: 56
  • Erma-EMP 004.jpg
    Erma-EMP 004.jpg
    70.2 KB · Views: 36
  • Erma-EMP 005.jpg
    Erma-EMP 005.jpg
    69.9 KB · Views: 45
  • Erma-EMP 006.jpg
    Erma-EMP 006.jpg
    64.9 KB · Views: 42
  • Erma-EMP 007.jpg
    Erma-EMP 007.jpg
    63.7 KB · Views: 31
  • Erma-EMP 008.jpg
    Erma-EMP 008.jpg
    68.2 KB · Views: 29
  • Erma-EMP 009.jpg
    Erma-EMP 009.jpg
    63.1 KB · Views: 30
this is incredible! thank you so much! is there a trick to converting the 9mm Largo mags to run 9x19?
 

Military Rifle Journal
Back
Top