I have (3) IDF Crest Mausers one in .22, one in 7.62, and one that is 8mm. The 8mm the finish does not appear to be original and the bolt is marked differently than the original bolt on the 7.62 and .22. Appears the bolt is Czech with German Parts. However the barrel is FN. Was this an Israeli refurb before they converted them to 7.62, or did they keep some in 8mm, did FN use a mix of parts, or is it just completely wrong?
Attachments
-
IMG_20231203_130021_(1200_x_600_pixel).jpg432.3 KB · Views: 48
-
PXL_20230428_050043472~2.jpg390.8 KB · Views: 47
-
IMG_20231203_130150_(800_x_1200_pixel).jpg365.8 KB · Views: 46
-
PXL_20230428_050340934~2.jpg273.7 KB · Views: 37
-
PXL_20230428_050338256~2.jpg348.4 KB · Views: 38
-
PXL_20230428_050345337~2.jpg270.8 KB · Views: 36
-
IMG_20231203_130430_(800_x_600_pixel).jpg168.6 KB · Views: 35
-
IMG_20231203_130401_(1200_x_600_pixel).jpg458.5 KB · Views: 31
-
IMG_20231203_130336_(1200_x_600_pixel).jpg452.1 KB · Views: 31
-
PXL_20231203_174427939~2.jpg298.8 KB · Views: 28
-
PXL_20231203_174439156~2.jpg299.3 KB · Views: 27
-
PXL_20231203_174543983~2.jpg260.9 KB · Views: 29
-
PXL_20231203_174557382~2.jpg149.2 KB · Views: 39