Third Party Press

Latest activity

  • B
    Recently picked up one of these, since they are not very often documented I thought I would share a few pictures of this one. It is a...
  • mdarnell19
    mdarnell19 replied to the thread Bcd4 Long Side Rail #84930.
    Georg, I have found that most LSR snipers fall in a serial number range. Most before about 20k before the roller over in 1945 are likely...
  • heavy_mech
    heavy_mech reacted to ltong29's post in the thread Odd G24 (t) marking with Like Like.
    This b-block in the picture archive seems to have a G.24(t) roll mark similar to the one OP posted. Even with the angle, you can see...
  • heavy_mech
    heavy_mech reacted to AndyB's post in the thread Odd G24 (t) marking with Like Like.
    There is various stamp used in time of production, so i see no problem there.
  • heavy_mech
    heavy_mech replied to the thread Odd G24 (t) marking.
    Agreed. Different stamps made by different tool/die makers in use at the same location on different lines. Seems quite definitive now.
  • mdarnell19
    mdarnell19 reacted to Hercules's post in the thread Bcd4 Long Side Rail #84930 with Like Like.
    I agree with that. It is the overall impression of the rifle as I stated above as well as checking under the butt plate.
  • CanadianAR
    CanadianAR reacted to Hercules's post in the thread Bcd4 Long Side Rail #84930 with Like Like.
    I have tried to find a specific marking. I have taken several apart. Several more LSR rifles than I have posted here. I have not...
  • Hambone
    It's beautiful Absolut! Work of art "Gen. 1" SMG. Pick sticky for ref.
  • B
    brick26 replied to the thread Erma DSM 34.
    I forgot to ask if letter W in front of trigger guard and letter V behind are inspector markings? Thanks
  • AndyB
    AndyB replied to the thread Odd G24 (t) marking.
    There is various stamp used in time of production, so i see no problem there.
  • Rutche
    Rutche replied to the thread Odd G24 (t) marking.
    looks exactly the same interesting
  • ltong29
    ltong29 replied to the thread Odd G24 (t) marking.
    This b-block in the picture archive seems to have a G.24(t) roll mark similar to the one OP posted. Even with the angle, you can see...
    • G.24t dou 41 8792b rec nos left.jpg
  • B
    brick26 replied to the thread Erma DSM 34.
    yes, the serial numbers match on receiver , bolt , shroud and bolt safety as far as i remember. I will post more pics a bit later thanks
  • E
    Hello! Does anyone have a fg42 type 2 muzzle blueprint?I have read and researched that the fg42 type 2 muzzle brake is very effective...
  • M
    mike44f reacted to agentcq's post in the thread G43 buttplate with Like Like.
    I would say an original butt plate for sure. VoPo rifles have blued butt plates. Notice how the door on the 'repro' does not have the...

Military Rifle Journal
Top